-
![Bellow Seals]()
Bellow SealsK606 type: high temperature rotating bellows, relying on the bellows under the fork drive, applied to the viscosity and easy crystallization conditions.
-
![Welded Metal Bellows]()
Welded Metal BellowsWelded metal bellows are mechanical devices designed to provide a flexible, leak-tight seal for various engineering applications.
-
![Metal Bellows Seal]()
Metal Bellows SealSingle face. Balanced type. Arbitrary rotation. According with EN12756 (DIN24960) standard. KBF series is widely used, the dynamic ring O ring can not compensate for the role, so bellows movement
-
![Bellow Mechanical]()
Bellow MechanicalSingle face. Balanced type. Arbitrary rotation. According with EN12756 (DIN24960) standard. KBWT80 series is widely used, suitable for high temperature, high viscosity medium, so bellows movement
-
![Metal Bellow Seal]()
Metal Bellow SealComply with DIN24960 and GB6556. Metal bellows. O type sealing ring. Easy installation, easy adjustment. Corrosion resistant seal
-
![Welded Metal Bellows]()
Welded Metal BellowsDesign characteristics of corrugated pipe by using 45 wave of advanced, medium pressure on the inner hole weld mushroom stress decreases to a minimum, the auxiliary seal ring is made of flexible
-
![Bellow Type Mechanical Seal]()
Bellow Type Mechanical SealK604 type: high temperature general purpose metal bellows, used for large shaft diameter and high speed condition and the sealed cavity is not standard big diameter.
-
![Elastomer Bellow Seals]()
Elastomer Bellow SealsK609 type: high temperature rotating bellows, its narrow cross-section design makes installation easier.
-
![Bellows Mechanical]()
Bellows MechanicalSingle face. Balanced type. Arbitrary rotation. According with EN12756 (DIN24960) standard. KBF series is widely used, the dynamic ring O ring can not compensate for the role, so bellows movement
-
![Metal Flex Welded Bellows]()
Metal Flex Welded BellowsDesign characteristics of corrugated pipe by using 45 wave of advanced, medium pressure on the inner hole weld mushroom stress decreases to a minimum, the auxiliary seal ring is made of flexible
Dwayne Dinardo
Myrna Austin
Lorenzo Sorrell
Jerry Rolston
Richard Dodson
Brandon Enriquez
Mechanical Seal The mechanical seal always consists of two parts: the rotating part (yellow part) and the stationary part (orange part). The two parts move relative to each other, and the static ring...
Category 1 seals are intended for use in non-API 610 pump seal chambers, meeting the dimensional requirements of ASME B73.1, and ASME B73.2 seal chamber dimensions and their application is limited to...
Swagelok design options include high-point vents in the seal support system, allowing the system to be vented and cleared of entrapped air. System maintenance during turnarounds and projects requires...
The design of mechanical seals requires basic components and principles at the interface between a rotating shaft and a stationary pump or mixer or seal-chamber housing. The mechanical seal will...
Mechanical seals are typically divided into two categories: by Arrangement and by Design. Mechanical Seals Arrangement Single Inside Mounted Outside Mounted Dual Pressurized Non pressurized Design...
Mechanical seal support systems, like all Swagelok products, are also backed by our Limited Lifetime Warranty. Designed for Reliability and Maintenance Swagelok design options include high-point...