What Is The Installation Method Of Mechanical Seal For Water Pump

1. Firstly, remove the machine seal. The steps for removing the machine seal vary depending on the brand of the water pump. For example, a certain brand of water pump needs to remove the motor and use a screwdriver to remove the screws before removing the seal.
2. After removing the coupling, lift the motor and be careful not to collide during lifting to avoid damage to the motor.
3. First open the large hexagon below, then remove the small hexagon screw and lift the old machine seal out along the thread.
4. Align the new seal with the socket and slowly insert it, as the seal comes with its own weight and can be inserted slowly without exerting force. It can be inserted without the need for brute force.
5. Lift the machine seal with wire, insert the gasket upwards, and align it with the machine seal position.
6. Finally, reinstall the machine seal in the original screw order to complete the installation.