-
![Rubber Bellow Mechanical Seal]()
Rubber Bellow Mechanical SealStructure: Single End. Pressure: Medium Pressure Mechanical Seals. Speed: General Speed Mechanical Seal. Temperature: Temperature Mechanical Seal. Performance: Wear. Standard: DIN24960, ISO3069,
-
![Rubber Bellow Mechanical Seal]()
Rubber Bellow Mechanical SealRubber bellow mechanical seal is sealing devices that use a flexible rubber bellow to provide a sealing force on a stationary sealing element.
-
![Mechanical Seals For Pumps]()
Mechanical Seals For PumpsMechanical seals for pumps are a key component in pump systems. These devices maintain the integrity of the pump system by preventing fluid leakage and keeping contaminants out.
-
![Metal Mechanical Seal]()
Metal Mechanical SealSingle face. Unbalanced type. Arbitrary rotation. According with EN12756 (DIN24960) standard
-
![Elastomer Mechanical Seal]()
Elastomer Mechanical SealSingle face. Balanced type. Arbitrary rotation. According with DIN24960 standard. KB7 series seal is widely used, good interchangeability. The static ring adopts floating type, the installation is
-
![Rubber Bellow Seal]()
Rubber Bellow SealMEDIUMS: water, oil and weakly-corrosive mediums. Temperature: -20℃-150℃. Pressure: ≤0.8MPA. Speed: ≤10m/sec
-
![Teflon Bellow Mechanical Seal]()
Teflon Bellow Mechanical SealTeflon bellow mechanical seal GD-WB2.. Operating parameters. Temperature: -20 - 120℃. Speed: ≤10m/s. Pressure: ≤0.5Mpa. Combined materials. Rotary face: Carbon/Sic/Glass filled PTFE. Stationary Ring:
-
![Teflon Bellow Seal]()
Teflon Bellow SealExternally installed as a single end multi spring PTFE sylphon bellows structure. Both the dynamic and static rings are made of corrosion-resistant hard alloy or silicon carbide
-
![Mechanical Seal for Water Pump]()
Mechanical Seal for Water PumpSingle face. Unbalanced type. Arbitrary rotation. According with EN12756 (DIN24960) standard. KU74 series of wide application, strong interchangeability, tight sealing ring embedded, easy
-
![Mechanical Seals for Pumps]()
Mechanical Seals for PumpsThe utility model has the advantages that the single end face is an unbalanced multi spring sealing structure, the auxiliary seal is a rubber O ring, the structure is simple and reliable, and the
-
![Types Of Mechanical Seals for Pumps]()
Types Of Mechanical Seals for PumpsSingle end balance type multi spring sealing structure for auxiliary sealing rubber O ring, the structure is simple and reliable, it is the balance of the structure of KU8, can be used in a high
-
![Seal for Pump]()
Seal for PumpSingle face. Balanced type. Arbitrary rotation. Spring and medium isolation. Compliant with DIN24960 standard
Scott Musgrove
John Runion
Kathryn Saum
Margene Hernandez
Sharon Spivey
Beverly Smith
PTFE Mechanical Seals Mechanical seals often need to be used in chemical applications. When confronted with some harsh chemicals, mechanical seals containing elastomers made of Viton, Kalrez or...
The features of the John crane 109 mechanical seal is that the Shaft-mounted wedge seal, with PTFE or graphite-based wedges for corrosion resistance or high-temperature application. And...
For your custom PTFE mechanical seals design, or reverse engineering, our exemplary service and efficient production ensures prompt deliveries coupled with outstanding service. In...
Stationary Mechanical Seals > PTFE Mounted Stationary Mechanical Seals Type 23 ‘L’ shaped PTFE boot-mounted stationary to suit common American housing dimensions. Type 25 ‘T’...
Replacement for: John Crane 109B Mechaical Seal...
Jan 17, 2012 · FluoroSeal PTFE lip seals provide the designer a significant improvement in performance over elastomeric lip seals at a much lower cost than the mechanical face seal. FluoroSeal PTFE...