-
![Mechanical Seals For Pumps]()
Mechanical Seals For PumpsMechanical seals for pumps are a key component in pump systems. These devices maintain the integrity of the pump system by preventing fluid leakage and keeping contaminants out.
-
![Teflon Bellow Mechanical Seal]()
Teflon Bellow Mechanical SealThe Teflon bellow mechanical seal design faces are made of glass-filled PTFE, are designed to handle highly corrosive liquids.
-
![Metal Mechanical Seal]()
Metal Mechanical SealSingle face. Unbalanced type. Arbitrary rotation. According with EN12756 (DIN24960) standard
-
![Non Cartridge Mechanical Seal]()
Non Cartridge Mechanical SealDouble face. Unbalanced type. Arbitrary rotation. Multi spring structure. With the KU7 series of the same design performance, in addition to the installation length of the drive seat, the other
-
![Elastomer Mechanical Seal]()
Elastomer Mechanical SealSingle face. Balanced type. Arbitrary rotation. According with DIN24960 standard. KB7 series seal is widely used, good interchangeability. The static ring adopts floating type, the installation is
-
![Rubber Bellow Seal]()
Rubber Bellow SealMEDIUMS: water, oil and weakly-corrosive mediums. Temperature: -20℃-150℃. Pressure: ≤0.8MPA. Speed: ≤10m/sec
-
![Teflon Bellow Mechanical Seal]()
Teflon Bellow Mechanical SealTeflon bellow mechanical seal GD-WB2.. Operating parameters. Temperature: -20 - 120℃. Speed: ≤10m/s. Pressure: ≤0.5Mpa. Combined materials. Rotary face: Carbon/Sic/Glass filled PTFE. Stationary Ring:
-
![Teflon Bellow Seal]()
Teflon Bellow SealExternally installed as a single end multi spring PTFE sylphon bellows structure. Both the dynamic and static rings are made of corrosion-resistant hard alloy or silicon carbide
-
![Mechanical Seal for Water Pump]()
Mechanical Seal for Water PumpSingle face. Unbalanced type. Arbitrary rotation. According with EN12756 (DIN24960) standard. KU74 series of wide application, strong interchangeability, tight sealing ring embedded, easy
-
![Mechanical Seals for Pumps]()
Mechanical Seals for PumpsThe utility model has the advantages that the single end face is an unbalanced multi spring sealing structure, the auxiliary seal is a rubber O ring, the structure is simple and reliable, and the
-
![Types Of Mechanical Seals for Pumps]()
Types Of Mechanical Seals for PumpsSingle end balance type multi spring sealing structure for auxiliary sealing rubber O ring, the structure is simple and reliable, it is the balance of the structure of KU8, can be used in a high
-
![Seal for Pump]()
Seal for PumpSingle face. Balanced type. Arbitrary rotation. Spring and medium isolation. Compliant with DIN24960 standard
Raul Watson
Suzette Youngblood
Anthony Lopez
Hannah Warren
Betty McKinnie
Mark Patton
Learn the differences and advantages of single, tandem, double and dual mechanical seals. A tandem seal has two seals with a buffer fluid between them, while a dual seal has two seals...
タンデム メカニカル シールは、漏れ防止と信頼性を強化するデュアル シール配置です。...
A tandem mechanical seal is a specialized sealing arrangement that consists of two mechanical seals mounted in series within the seal chamber. The tandem design offers a unique set of advantages,...
Feb 2, 2016 · A single mechanical seal consists of two very flat surfaces that are pressed together by a spring and slide against each other. Between these two surfaces is a fluid film generated by...
3.Tandem Double Mechanical Seals Tandem, or face-to-back double mechanical seals, are sealing configurations where two mechanical seals are arranged in series. This system provides a superior level...
Aug 23, 2015 · Double gas seals have been used in low pressure coker and wet gas compressor applications. Monitoring tandem seals Monitoring both primary and secondary tandem seal conditions can...