What are some precautions to take when using mechanical seals for kettles?

Mechanical seal for kettle is a pipeline type device, mainly used as a high-performance emulsifying equipment for continuous production or cyclic processing of medium and fine particle materials. We have already provided a detailed introduction to some of its basic information before, so I believe that when you see it, you will not feel unfamiliar. Below are some things to pay attention to when using it.

Although there are many advantages to using mechanical seals for kettles, there are still many things to pay attention to during operation. The mechanical seal of the kettle generates strong shear force during the high-speed operation of the rotor and stator, which allows for the dispersion, shearing, and emulsification of materials in a short period of time. It has a wide range of applications in industries such as daily chemical, food, chemical, petroleum, coatings, etc. So its usage range is very broad. However, in the daily production process, equipment failure may occur due to aging or improper operation of the mechanical seals used in the kettle. At this time, we remind users to clean the pump body before use. It is necessary to have cooling water before starting up, and the purpose of doing so is to avoid mechanical seal cracking. For these issues, they are all quite important. If you didn't understand them well before, you can learn them now.

When using mechanical seals for kettles, in addition to the points mentioned above, it is also important to pay attention to whether the pump head reverses after being powered on. If the pump head reverses, please stop immediately and rewire and restart. And when the kettle is operated with a mechanical seal, it is definitely not allowed for dry powder or small lumps to directly enter the pump chamber at this time. Some users are still unfamiliar with this aspect, and sometimes malfunctions occur frequently. I need to understand what I said today. And the mechanical seal used for the kettle must be a fluid, as dry solids can get stuck in the rotor and stator of the emulsion pump, causing the motor to burn out. In addition, the staff should be aware that as long as it is operating normally, they should pay close attention to whether there is any substance leakage in the pump body. If any leakage is found, the equipment should be stopped immediately. What you need to do is to identify the cause, eliminate it, and replace the mechanical seal. If abnormal noise occurs during use, the machine should be stopped and carefully eliminated. Wait for you to carry out maintenance before operating the work. After each production, the interior of the pump chamber should be cleaned to maintain stability.

After the explanation of the above content, we have also seen some things that must be paid attention to when using mechanical seals for kettles. As long as you pay more attention to our website, you can see other issues related to mechanical seals for kettles. That's all for today's content. I hope it can be helpful to you.